How to Cut MEXC Futures Fees — Save on Every Trade

By Editorial Team · July 2026

If you trade futures on MEXC, those small fees add up fast. A 0.02% taker fee might look tiny, but on a $10,000 position, that’s $2 gone. Over 100 trades a month, you’re losing $200 just in fees. This guide shows you exactly how to reduce those costs using tiered VIP discounts, the MEXC token (MX), and smart trading strategies. No fluff — just actionable steps.

Who This Is For

This guide is for active MEXC futures traders — whether you’re scalping 10 trades a day or holding leveraged positions for weeks — who want to keep more of their profits by minimizing exchange fees.

What You’ll Need

• A verified MEXC account (Level 1 or higher)
• At least 500 MX tokens in your spot wallet (for fee discounts)
• Basic understanding of limit vs. market orders
• 30-day trading volume history (to check your current tier)
• Access to MEXC’s “Fee Structure” page in your account settings

Step 1: Hold MX Tokens for an Instant Fee Discount

MEXC’s native token, MX, is your best tool for fee reduction. When you hold at least 500 MX in your spot wallet, you automatically qualify for a tiered discount on all futures trades. The discount applies to both maker and taker fees, and it scales with the number of MX you hold.

• 500–999 MX: 15% off taker fee, 15% off maker fee
• 1,000–4,999 MX: 20% off both fees
• 5,000+ MX: 25% off both fees

For example, if you hold 1,000 MX and your base taker fee is 0.06%, you’ll pay only 0.048% — saving $1.20 on a $10,000 trade. Over 50 trades, that’s $60 saved. And you can sell the MX later if you want — the discount is based on holding, not staking. Just make sure the MX is in your spot wallet, not in a trading account or locked staking contract.

Step 2: Use Limit Orders to Become a Maker

MEXC charges different fees for makers and takers. Takers pay a higher fee because they “take” liquidity from the order book. Makers add liquidity and pay less — sometimes 0.00% on certain pairs. By using limit orders instead of market orders, you become a maker on most trades.

Here’s the trick: Place a limit order slightly above the current ask price (for buys) or below the current bid price (for sells). If the market moves to your price, your order fills as a maker. If it doesn’t, you cancel and try again. On MEXC, the maker fee for futures is typically 0.02% for standard users, while the taker fee is 0.06%. Switching to limit orders on half your trades could save you 40% on total fees.

But there’s a catch — limit orders don’t always fill instantly. If you need to enter a position fast (like during a breakout), you’ll have to use a market order and pay the taker fee. The key is to use limit orders for entries and exits when you have time to wait. For scalpers, this might not work every time, but it works for 60–70% of trades.

Step 3: Increase Your 30-Day Trading Volume

MEXC has a VIP tier system based on your total trading volume over the last 30 days. The more you trade, the lower your fees. Here’s the breakdown for futures:

• VIP 0: Taker 0.06%, Maker 0.02% (0–50 BTC volume)
• VIP 1: Taker 0.055%, Maker 0.018% (50–200 BTC volume)
• VIP 2: Taker 0.05%, Maker 0.016% (200–500 BTC volume)
• VIP 3: Taker 0.045%, Maker 0.014% (500–1,000 BTC volume)
• VIP 4: Taker 0.04%, Maker 0.012% (1,000+ BTC volume)

So if you trade 200 BTC in 30 days (about 6.7 BTC daily), you drop from VIP 0 to VIP 2. On a $10,000 taker trade, that’s a saving of $1.00 per trade. Over 100 trades, that’s $100 saved. And these VIP rates stack with the MX discount. For example, if you’re VIP 2 with 1,000 MX, your taker fee drops from 0.05% to 0.04% — a combined 33% reduction from the base rate.

To check your current volume, go to MEXC’s “Account” → “Fee Structure” page. If you’re close to the next tier, consider consolidating your trades or increasing position sizes slightly to hit the threshold faster. But don’t overtrade just to lower fees — that defeats the purpose.

Step 4: Use MEXC’s “Fee Discount” Feature in Settings

Many traders don’t know this, but MEXC has a hidden setting to apply your MX discount automatically. Go to “Account” → “Fee Discount” and toggle on “Use MX for fee deduction.” When enabled, MEXC automatically converts a portion of your MX to cover trading fees at a discounted rate. This is different from the holding discount — it actually uses MX as payment, giving you an additional 20% off the already-discounted fee.

For example, if your discounted taker fee is 0.048% (from Step 1), using MX payment drops it to 0.0384%. That’s a total reduction of 36% from the base rate. Just make sure you have at least 50 MX in your wallet to cover the first few trades. The feature is free to enable and works on all futures pairs.

One warning: If the MX price drops sharply, you might end up using more MX than expected to cover fees. But historically, MX has been relatively stable compared to smaller altcoins. And since you’re holding MX anyway for the discount, this is a natural fit.

Step 5: Trade Pairs With Lower Base Fees

Not all futures pairs on MEXC have the same fee structure. Major pairs like BTC/USDT and ETH/USDT usually have the lowest base fees (0.02% maker, 0.06% taker). But some altcoin pairs and perpetual contracts have higher rates — up to 0.10% taker. Before you open a position, check the pair’s fee schedule on the trading page.

Here’s a quick comparison:

If you trade low-volume altcoins, you might pay up to 0.10% taker. That’s 67% higher than BTC futures. For active traders, this difference alone can cost hundreds of dollars monthly. Stick to major pairs when possible, or factor the higher fee into your profit targets. For example, on a $5,000 SHIB trade at 0.08%, you pay $4.00 instead of $3.00 on BTC — that’s $1.00 extra per trade. Over 200 trades, it’s $200 lost.

Also, avoid trading during high volatility periods when spreads widen. MEXC adjusts fees dynamically based on liquidity — during flash crashes or pump events, some pairs temporarily increase taker fees to 0.10% or more. Check the “Funding Rate” and “Fee” tabs on the trading page before entering.

Common Pitfalls and Risks

⚠️ Risk: Forgetting to enable MX fee deduction. Many traders hold MX but don’t toggle on the “Use MX for fee deduction” setting. You literally leave money on the table. Fix: Go to Account → Fee Discount and enable it. Double-check it’s active before your first trade of the day.

⚠️ Risk: Overtrading to hit a VIP tier. Chasing higher volume just to lower fees can backfire. If you trade 50 BTC extra this month to reach VIP 1, but lose 2% on those trades, you’re worse off. Fix: Focus on profitable trades first. Let VIP tiers be a natural side effect of your activity, not a goal.

⚠️ Risk: Using market orders during low liquidity. On pairs like SHIB or DOGE, market orders can trigger slippage of 0.5–1% on top of the taker fee. That slippage often dwarfs the fee itself. Fix: Use limit orders or post-only orders for illiquid pairs. If you must use market orders, keep position sizes small.

This content is for educational and informational purposes only and does not constitute financial advice. All trading involves risk, and past fee savings don’t guarantee future results.

What Next?

Start by holding 500 MX in your spot wallet and enabling fee deduction, then track your savings over the next 30 days using MEXC’s trade history report.

Sources & References

• MEXC Official Fee Structure
• Investopedia — Maker-Taker Fee Model
• CoinDesk — Crypto Exchange Fees Explained
• For more context on exchange mechanics, check our guide on Cardano ADA Futures Strategy for New York Session.

— Editorial Team